3″ submersible pump of KMP INDUSTRRIES are designed to operate in a fully submerged environment where you can connect up the discharge hose, and throw them inside borewell where minimum inner diameter has to be 75 mm . In a simple word it is a very flexible machine for you. The pumps are made with high quality raw materials in order to extract best performance with lowest operating cost.
3" SPECIFICATION | |
---|---|
Power Range | 0.5 H.P - 2 H.P |
Head Range | 35 mtrs - 100 mtrs |
Discharge | 20 LPM |
Operating Voltage | ( 180 V - 230 V ) - ( I Phase ) |
Outlet Size | 25 mm |
Method of starting | Capacitor start and capacitor run |
Maximum Start / Hour | 10 |
Maximum permissible amount of sand in water | 15 GRAM / Cubic meter |
MATERIAL OF CONSTRUCTION | |
---|---|
Outer pipe | S.S. 304 |
Shaft | S.S. 410 |
Impeller / Diffuser | Noryl |
Thrust bearing set | Impregnated Carbon / S.S |
Bearing Bush | LTB 4 |
SALIENT FEATURES |
---|
Easy assembling and dismantiling |
Good remedy for improperly drilled 4″ bore holes & Sandy borewells |
Sand proof – Design to protect motor & pump portions |
Built with thermoplastic impellers & Diffusers |
High quality S.S. Materials ( SS 304 / SS 410 ) which reduced risk or corrosion. |
Light weight & compact |
APPLICATION |
---|
Domestic water supply |
Water supply to high – rise buildings |
Gardens, Farms, Nurseries |
Housing complexes, bungalows |
MODEL | H.P | STAGE | METER | DISCHARGE (Lps) |
---|---|---|---|---|