The 6″ Vertical borewell submersible pumps are well suited for 150 mm borewell and above. These submersible pumps consists of multistage centrifugal, vertical axis pumps. The pumps are designed such that series of impellers rotate inside vane diffusers challenging the flow of fluid from each impeller to the suction opening of the next. The fluid passes through the series of impellers and leaves the pump via delivery outlet.
| Power Range | 3.0 H.P – 25.0 H.P |
|---|---|
| Speed | 2900 RPM |
| Operating Voltage | 415 V / 50 Hz AC Supply |
| Delivery Pipe Size | 50 mm |
| Head Range | 30 mts – 330 mts |
| Discharge | 9.0 LPS – 2.0 LPS |
| Maximum Start / Hour | 15 times |
| Method of starting | STAR / STAR DELTA |
| Outer pipe | S.S. 202 / S.S 304 |
|---|---|
| Rotor Shaft | S.S. 410 / S.S 416 |
| Thrust bearing set | Impregnated Carbon / S.S |
| Bearing Bush | LTB 4 |
| Impeller | Stainless Steel |
| Diffusers | Cast iron |
| Suction / NRV | Cast Iron FG 200 / FG 250 |
| Diaphragm | Nitrile Butyl Rubber (NBR) |