Welcome to factory & industry business

Toll Free: 18008 333 133

Established in 1989
Our Technology Your Success

Founded
1989

1. CNC MACHINING

We installed more than 50 CNC machines to manufacture the intricate components with tight tolerances.

2. OWN FOUNDRY

We at KMP Foundry adopt best manufacturing practices for producing castings with consistency in quality & cost effectiveness. We also have vast experience in pattern making, foundry technology and machining.

3. DELIVERING QUALITY

Quality comes not from inspection but from improvement of the production process. We at KMP follow process of monitoring performance and taking action to ensure desired result.

4. ISO CERTIFIED

All our factories and operations are ISO 9001 : 2015 certified that shows we are having internationally recognized quality management system

About Company

Manufacturing

1. Foundation:

The foundation of the centrifugal pump should be substantially hard enough in order to support the pump and rest of installed industrial unit.

2. Mounting:

The pump base must be levelled in such a way that the pump shaft is in vertical alignment. The pump suction, as well as discharge flanges, should be in vertical and horizontal plane respectively.

3. Field Alignment:

Enough spacing needs to be kept between the faces of coupling halves so that they do not strike each other when the driver rotor is moved towards the pump. In order to check the alignment, tools such as straight edge and taper gauge must be used.

4. Piping:

The suction and discharge pipes should be supported independently with the help of pipe hangers and support blocks. This will prevent strain in the centrifugal pump joints and casing.

5. Wiring:

Centrifugal pump wiring needs to be of adequate size to prevent voltage drop. It should be noted not to start centrifugal pump until it is filled with liquid.

6. Rotation:

The rotation of the centrifugal pump is indicated on the pump casing. The correct rotation needs to be established before assembling the coupling on base-mounted units.

7. Grounding Motor:

Connect the ground wire to the approved ground and then connect to the provided terminal.

8. Priming Flooded Suction:

Open the air vent valve or plug in the centrifugal pump casing to open the gate valve of the suction line.

9. Starting The Centrifugal Pump:

In order to start the centrifugal pump, the gate valve in the discharge line should be closed and opened gradually so that the motor approaches full speed.