5″ Submersible pumpsets of KMP INDUSTRRIES are multistage centrifugal units which operate below water level and are driven by water filled AC ) three phase induction submersible motors. There pumps are will suited for borewell diameter of minimum 5″ (or) 125 mm . Good remedy for improperly drilled 6″ bore holes & Sandy borewells.Impellers and diffusers are manufactured with high grade stainless steel which can be well suited for salty conditions and better performance.
| Power Range | 3.0 H.P – 12.5 H.P |
|---|---|
| Speed | 2900 RPM |
| Operating Voltage | Three phase ( 360 V to 415 V ) AC |
| Delivery Pipe Size | 40 mm , 50 mm |
| Max. Outer Diameter | 125 mm |
| Head Range | 45 mtrs – 650 mtrs |
| Discharge | 8.0 LPS – 1.0 LPS |
| Maximum Start / Hour | 20 times |
| Method of starting | DOL – 3 Phase |
| Outer pipe | S.S. 202 |
|---|---|
| Shaft | S.S. 410 |
| Thrust bearing set | Impregnated Carbon / S.S |
| Bearing Bush | LTB 4 |
| Impeller / Diffuser | Cast Iron / Stainless Steel |
| Diaphragm | Nitrile Butyl Rubber (NBR) |