4″ Stainless Steel Submersible pumpsets of KMP INDUSTRRIES are multistage centrifugal units which operate below water level and are driven by water filled AC single phase (or) three phase induction submersible motors. There pumps are will suited for borewell diameter of minimum 4″ (or) 100 mm . These pumps work on principle of a modular structure where with limited number of parts different tailor made request can be achieved.Impellers and diffusers are manufactured with high grade stainless steel which can be well suited for salty conditions and better performance.
| Power Range | 1.0 H.P – 7.5 H.P |
| Speed | 2900 RPM |
| Operating Voltage | Single phase ( 180 V to 230 V ) AC |
| Three phase ( 360 V to 415 V ) AC |
| Delivery Pipe Size | 32 mm |
| Max. Outer Diameter | 98 mm |
| Head Range | 25 mtrs – 350 mtrs |
| Discharge | 3.5 LPS – 0.3 LPS |
| Maximum Start / Hour | 20 times |
| Method of starting | CSCR – 1 Phase |
| DOL – 3 Phase |
| Outer pipe | S.S. 202 |
| Shaft | S.S. 410 |
| Thrust bearing | Impregnated Carbon / S.S |
| Bearing Bush | LTB 4 |
| Impeller / Diffuser | Stainless Steel |
| Diaphragm | Nitrile butyl Rubber (NBR) |
- There is a wide range of pumps to match any duty point.
- High pump efficiency.
- Due to less weight installation cost is very less
- Semi axial impellers make priming automatic
- Easy to dismantle and repair due to right construction.
- Domestic water supply
- Small irrigation
- Civil and industrial applications
- Fire fighting applications