The 6″ submersible pumpsets have a complete balance between hydraulic and electric design. The electrically driven motors are water cooled type, and the rotor is mounted in a carbon thrust bearing which absorbs axial thrust, where as mixed flow type pumps are for medium heads and high discharge. This is a compact unit which operates beneath the surface of water and is suspended vertically from raising main when installed.
| Power Range | 3.0 H.P – 15.0 H.P |
| Speed | 2900 RPM |
| Impeller Type | Mixed \ Bowl |
| Head Range | 30 mts – 120 mts |
| Discharge | 20.0 LPS – 2.0 LPS |
| Operating Voltage | 415 V / 50 Hz AC Supply |
| Delivery Pipe Size | 50 MM |
| Method of Starting | STAR / STAR DELTA |
| Max. Start / Hour | 15 |
| Motor Body | S.S. 202 / S.S 304 |
| Rotor Shaft | S.S. 410 / S.S 416 |
| Thrust bearing set | Impregnated Carbon / S.S |
| Diffusers | Cast iron |
| Impeller | Stainless Steel |
| Suction / NRV | Cast Iron FG 200 / FG 250 |
| Vertical Bearing Bush | LTB 4 |
- The motor has a radial as well as axial thrust bearing.
- There are water filled water lubricated motor.
- Diaphragm below bearing compensates over pressure which arises due to thermal expansion when temperature of winding rises.
- Designed for continues operation with certain limitations.
- For pumping clean, cold water non corrosive & non abrasive.
- Irrigation
- For urban and rural drinking water supply
- Pressure boosting
- Gardens, Forms and nurseries.