The 6″ Vertical borewell submersible pumps are well suited for 150 mm borewell and above. These submersible pumps consists of multistage centrifugal, vertical axis pumps. The pumps are designed such that series of impellers rotate inside vane diffusers challenging the flow of fluid from each impeller to the suction opening of the next. The fluid passes through the series of impellers and leaves the pump via delivery outlet.
| Power Range | 3.0 H.P – 25.0 H.P |
| Speed | 2900 RPM |
| Impeller Type | Radial |
| Head Range | 30 mts – 330 mts |
| Discharge | 9.0 LPS – 2.0 LPS |
| Operating Voltage | 415 V / 50 Hz AC Supply |
| Delivery Pipe Size | 50 MM |
| Method of Starting | STAR / STAR DELTA |
| Max. Start / Hour | 15 |
| Motor Body | S.S. 202 / S.S 304 |
| Rotor Shaft | S.S. 410 / S.S 416 |
| Thrust bearing set | Impregnated Carbon / S.S |
| Diffusers | Cast iron |
| Impeller | Stainless Steel |
| Suction / NRV | Cast Iron FG 200 / FG 250 |
| Vertical Bearing Bush | LTB 4 |
- The motor has a radial as well as axial thrust bearing.
- There are water filled water lubricated motor.
- Diaphragm below bearing compensates over pressure which arises due to thermal expansion when temperature of winding rises.
- Designed for continues operation with certain limitations.
- For pumping clean, cold water non corrosive & non abrasive.
- Irrigation
- For urban and rural drinking water supply
- Pressure boosting
- Gardens, Forms and nurseries.