V5 to V4 submersible pump of KMP INDUSTRRIES are multistage centrifugal units which operate below water level and are driven by water filled AC three phase induction submersible motors. In this type V5 motor is connected with V4 Stainless steel pump.These pumps are will suited for borewell diameter of minimum 6″ (or) 150 mm.
| Power Range | 5.0 H.P – 12.5 H.P |
|---|---|
| Speed | 2880 RPM |
| Operating Voltage | Three phase ( 360 V to 415 V ) AC |
| Delivery Pipe Size | 32 mm, 40 mm |
| Max. Outer Diameter | 98 mm |
| Head Range | 15 mtrs – 620 mtrs |
| Discharge | 2.0 LPS – 0.3 LPS |
| Method of starting | DOL – 3 Phase |
| Outer pipe | S.S. 202 |
|---|---|
| Shaft | S.S. 410 |
| Thrust bearing set | Impregnated Carbon / S.S |
| Bearing Bush | LTB 4 |
| Impeller / Diffuser | Stainless Steel |
| Diaphragm | Nitrile Butyl Rubber (NBR) |
V5 to V4 submersible pump of KMP INDUSTRRIES are multistage centrifugal units which operate below water level and are driven by water filled AC three phase induction submersible motors. In this type V5 motor is connected with V4 Stainless steel pump.These pumps are will suited for borewell diameter of minimum 6″ (or) 150 mm.
| Power Range | 5.0 H.P – 12.5 H.P |
|---|---|
| Speed | 2880 RPM |
| Operating Voltage | Three phase ( 360 V to 415 V ) AC |
| Delivery Pipe Size | 32 mm, 40 mm |
| Max. Outer Diameter | 98 mm |
| Head Range | 15 mtrs – 620 mtrs |
| Discharge | 2.0 LPS – 0.3 LPS |
| Method of starting | DOL – 3 Phase |
| Outer pipe | S.S. 202 |
|---|---|
| Shaft | S.S. 410 |
| Thrust bearing set | Impregnated Carbon / S.S |
| Bearing Bush | LTB 4 |
| Impeller / Diffuser | Stainless Steel |
| Diaphragm | Nitrile Butyl Rubber (NBR) |